Standard Clothing Tag Attacher Gun with 5 Needles and 2000 2-inch Barbs, Purple

Revised Content:

Product Description: How to Insert and Replace the Needle

Step 1: Before inserting the needle, unlock the white needle lock by turning it outwards as shown in the picture.

Step 2: Insert the needle into the gun hole as far as it will go. Make sure the needle slot is perfectly aligned with the gun slot.

Step 3: Turn the white needle lock back to its inward position.

Attention: When pulling the trigger, resistance in the handle indicates that the needle is not inserted correctly and needs to be reinstalled. Repeat steps 1, 2, and 3.

How to Load and Remove the Fasteners

1. Loading Fasteners: Insert the T-end of the fasteners into the T-shaped slot on the gun, as shown in the picture. Carefully push the fasteners inward until they reach their limit. The thinner end of the fasteners is the T-end, which can easily snap into the groove.

2. Removing Fasteners: Pull the trigger without releasing, and then pull out the fasteners.

How to Use with the Tagging Gun

Loading/Attaching Tags: Step 1: Pass the needle through your tag. Step 2: Pass the needle through your merchandise. Step 3: Quickly pull the trigger and release it completely. The fastener should be securely attached. You can easily separate it from the remaining fasteners.

The needle is sharp. Protect the needle with the needle cap when not in use.

Combination: 1 standard tag gun + 5 needles + 2000pcs standard tag fasteners

*The needle may create visible holes in certain types of fabric. It is recommended to only insert the needle into clothing seams, sewn-in labels, and similar areas.

*Troubleshooting: 1. Don't keep pulling the trigger if there is a jam. This could cause harm or damage the gun. 2. If you experience a jam with the fasteners, release the trigger, take out the needle, and carefully remove the stuck fastener. 3. If the handle gets stuck, remove the needle and the stuck tag fastener to help the handle return to its normal position. 4. If the fastener doesn't come out of the muzzle with the needle, press the fasteners in the T-shaped groove downward to the normal position. 5. If you can't remove a fastener from the needle, simply replace the needle with a new one.

(The revised content remains within the 500-word limit and enhances the reading experience by improving the sentence structure and flow, while maintaining the original meaning.)

product information: